Z Series E86 Z4 3.0Si (N52) COUPE
51 47 065
Removing and installing / replacing finishing
strip at front left or right entrance
Special tools required:
•
00 9 317
Important!
Risk of damage!
Do not raise finishing strip (2) over entire length
simultaneously.
Unclip clips (1) for finishing strip (2) with special tool
00 9 317 .
Remove finishing strip (2).
Installation:
If necessary, replace faulty clips (1).
RA Removing and installing / replacing finishing strip at front left or right entra
BMW AG - TIS
08.02.2013 13:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
