Z Series E86 Z4 3.0Si (N52) COUPE
Release expansion rivets (1).
Pull up cover (2) slightly and unclip in upward direction.
Installation:
Following parts of cover (3) must not be damaged or missing:
1
Catches
2
Mounts for expansion rivet
Note:
Seat removed for purposes of clarity.
Lever out plugs (1) on left/right and release screws underneath.
If necessary, disconnect plug connection for microswitch (2).
Disconnect plug connection (3).
Lever out panel (4) in upward direction and remove.
Installation:
Catches (5) must not be damaged
RA Removing and installing panel for rear storage box
BMW AG - TIS
08.02.2013 13:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -