Z Series E86 Z4 3.0Si (N52) COUPE
51 21 310
Removing and installing/replacing window
cavity cover strip on front door
Necessary preliminary tasks:
•
Remove door trim panel
Note:
Window cavity cover strip comes in one part for outside (4) and
inside (2).
Pop cover (1) out of front door.
Detach inner window cavity cover strip (2) from retainers (3)
towards top.
Detach outer window cavity cover strip (4) from outer door panel
towards inside/top.
Installation:
Coat window cavity cover strip (1) with water before fitting.
Installation:
If necessary, detach faulty retainers (1) from inner door panel
and replace.
RA Removing and installing/replacing window cavity cover strip on front door
BMW AG - TIS
08.02.2013 14:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -