Z Series E86 Z4 3.0Si (N52) COUPE
Unclip door trim (1) at top.
Feed out door trim (1) from unlocking knob (2).
Installation:
If necessary, replace defective retaining elements.
Unhook Bowden cable (1) from door lock (2).
Depending on version: Disconnect plug-in connections (1 to 4).
Important!
Risk of damage!
Lay cable (4) correctly around screwing point (5).
Installation:
If necessary, replace faulty clips.
Clips (1) are longer than the other clips.
Make sure clips are in correct installation positions.
1
Yellow clip
2
White clip
RA Removing and installing left or right front door trim panel
BMW AG - TIS
08.02.2013 14:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -