bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Removing And Installing_replacing Left Luggage Compartment Wheel Arch Trim|Page 1583 > < 6 RA Removing And Installing_replacing Roller Blind
Page 1
background image

51 47 151

Removing and installing/replacing left
luggage compartment wheel arch trim 

Necessary preliminary tasks:

Remove luggage compartment floor trim panel

Remove trim on tail panel

Remove panel in luggage compartment at top

Remove panel for roof pillar at rear

Remove light (1).

Release clips (2).

Release clip (3) on luggage compartment partition (4).

Important!

Luggage compartment wheel arch trim (2) is secured with
retainers (4) to luggage compartment partition (1). Work
carefully when removing so that tabs (5) are not damaged.

Feed luggage compartment partition (1) with luggage
compartment wheel arch trim (2) slightly out of roller cover (3).

Grip behind luggage compartment wheel arch trim (2) and pull off
retainers (4) in upward direction.

Remove luggage compartment wheel arch trim (2).

Installation:

Make sure luggage compartment partition (1) and luggage
compartment wheel arch trim (2) are correctly seated on roller
cover (3).

RA  Removing and installing/replacing left luggage compartment wheel arch trim

BMW AG - TIS

08.02.2013  14:46

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Removing And Installing_replacing Left Luggage Compartment Wheel Arch Trim|Page 1583 > < 6 RA Removing And Installing_replacing Roller Blind