Z Series E86 Z4 3.0Si (N52) COUPE
51 49 009
Replacing panel for rear lid at bottom
Necessary preliminary tasks:
•
Remove trim for rear window frame on left and right
Version with emergency release:
Detach handle (1) from clip (2).
Disconnect Bowden cable (3) from handle (1).
Installation:
Guide Bowden cable (3) through clip (2) and connect correctly in
handle (1).
Release screws (1).
Release trim panel (2) at clips (3) and remove in downward
direction.
Installation:
If necessary, replace faulty clips (1).
Sound insulation (2) must be fitted.
RA Replacing panel for rear lid at bottom
BMW AG - TIS
08.02.2013 14:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -