Z Series E86 Z4 3.0Si (N52) COUPE
Release nut (1) and remove. Pull off brake hub (2) with both
hands.
Installation:
Only a new nut is permitted for reinstallation.
Tightening Torque,
refer to Technical Data 86 10 20AZ.
Do not screw off brake hub under any circumstances.
To illustrate more clearly the work steps in Figs. R86 0057, R 86
0058 and R 86 0059, the wheel brake has been detached from
the axle.
This procedure is not necessary for removing the brake shoes.
Push back cable (1).
Remove shell (1).
RA Removing brake shoes
BMW AG - TIS
08.02.2013 20:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -