Century L4-2.2L VIN 4 (1994)
1.
Remove hardware retaining section of line to be replaced.
^
Note location of attaching hardware for installation.
2.
Remove section of pipe, hoses and clamps.
Inspection
^
Inspect hoses for cuts, swelling, cracks and distortion. Replace as required.
^
Inspect pipes for bends, kinks and cracks. Replace sections as required.
Installation
Important
^
Follow the same routing as original pipes and hoses.
^
Hoses, clamps and pipes must be properly secured to prevent chafing.
^
Reverse removal procedure.
