Century V6-173 2.8L VIN W FI (1987)
Mass Air Flow (MAF) Sensor Relay: Description and Operation
PURPOSE
The Mass Air Flow (MAF) Sensor relay supplies the MAF / Manifold Air Temperature (MAT) sensor assembly with battery voltage.
OPERATION
The MAT / MAF Sensor relay is energized by battery voltage from the ignition switch when in the "RUN" or "START" Position. This voltage
energizes the relay. Battery voltage is then supplied to the MAT / MAF Sensor allowing the MAF section of the assembly to operate.
NOTICE: If the Speed Density Update has been performed, the relay will be disconnected. This disables the MAF sensor, but allows the MAT
sensor to operate. Refer to Computers and Controls / Application and ID. See: Computers and Control Systems/Application and ID