Century V6-231 3.8L (1985)
FIGURE 4
11.
Raise and position fuel tank to vehicle underbody. Loosely attach straps to underbody, placing two 7/16" flat washers, Part Number 3899696, or
equivalent, on each of the strap bolts between strap and underbody attaching point (Figure 4).
FIGURE 5
12.
Ensure fuel tank strap spacer located on L.H. strap is properly positioned under forward flange of tank (Figure 5). Torque L.H. strap bolt and then
R.H. bolt to 25 ft.lbs. (34 N-m)
13.
Inspect to ensure forward tank flange is not contacting strap body bracket, and that sender pipes are not in contact with either tank or underbody.
Correct as required.
14.
Reconnect fuel hoses and electrical connector following Buick Chassis Service Manual procedure.
15.
Start vehicle, inspect for any fuel leakage and repair as necessary.
Parts that are required for this procedure are available from GMSPO and are noted below, excluding applicable pump and sender part numbers which
can be procured from GMSPO Parts Catalog.
Part Number
Description
Quantity Required
22530899
Sound Isolation Kit
1
25093965
Pulsator
1
3899696
7/16" Flat Washer or Equivalent
4
*22515965
Fuel Sender O-ring
1
*O-ring is included with fuel sender or pump service kit and separate ordering is not required when either of these components are replaced.
WARRANTY INFORMATION
Labor Operation Number:
T5122
Labor Time:
1.2 Hours
Trouble Code:
92
