Century V6-3.1L VIN J (2005)
Antenna Amplifier: Service and Repair
ANTENNA AMPLIFIER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the rear shelf trim panel.
2. Loosen the rear of the headliner.
3. Disconnect the rear window antenna lead from the rear window antenna connector.
4. Remove the antenna module bolt.
5. Disconnect the antenna module electrical connector.
6. Disconnect the antenna coaxial cable.
7. Remove the antenna module.
INSTALLATION PROCEDURE
1. Install the antenna module.
2. Connect the antenna coaxial cable to the antenna module.
3. Connect the antenna module electrical connector.
4. Install the antenna module bolt.
Tighten the bolt to 3 N.m (27 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
5. Connect the antenna lead to the rear window antenna connector.
6. With tape, secure the wiring harnesses to the inner upper panel of the rear window.
7. Install the headliner.
8. Install the rear shelf trim panel.