Century V6-3.1L VIN J (2005)
6.8.
Loosen the locking strip (A) on the 2-pin connector (H2-11) for the optic cable, located by the right-hand A-pillar.
6.9.
Loosen the catch (B) and remove the optic cable that runs backward in the car.
6.10. Dismantle the end cap from the new optic cable (12 783 577) and connect it to the connector H2-11. Push in the optic cable and make sure
the catch (B) locks and refit the locking strip (A).
6.11. Secure the connector and the old optic cable using the cable tie for the existing wiring harness (C).
Important: