Century V6-3.1L VIN J (2005)
Front Bumper Cover / Fascia: Service and Repair
Fascia Support Replacement - Front Bumper Upper
Fascia Support Replacement - Front Bumper Upper
Removal Procedure
1. Open the hood.
2. Remove the headlamps. Refer toHeadlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement in
Lighting Systems.
3. Remove the bolts from the center support bracket.
4. Remove the bolts from the front upper bumper fascia support at the radiator support.
5. Remove the front bumper fascia upper support from the front bumper fascia.
Installation Procedure
1. Install the front bumper fascia upper support to the front bumper fascia.
Notice: Refer toFastener Notice in Cautions and Notices.
2. Install the bolts to the front bumper fascia upper support at the radiator support.
Tighten the bolts to 2 Nm (18 lb in).
3. Install the front bumper fascia upper support bolts to the center support bracket.
Tighten the bolts to 10 Nm (88 lb in).
4. Install the headlamps. Refer toHeadlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement in
Lighting Systems.
5. Aim the headlamps. Refer toHeadlamp Aiming in Lighting Systems.
6. Close the hood.