Century V6-3.1L VIN J (2005)
Front Bumper Shock Absorber: Service and Repair
Energy Absorber Replacement - Front
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Remove the front bumper fascia. Refer toFascia Replacement - Front Bumper (See: Front Bumper Cover / Fascia/Service and Repair/Fascia
Replacement - Front Bumper) .
2. Remove the push-in retainers from the front bumper energy absorber using theJ 38778 .
3. Remove the front bumper energy absorber from the front bumper impact bar.
Installation Procedure
1. Install the front bumper energy absorber to the front bumper impact bar.
2. Install the push-in retainers to the front bumper energy absorber.
3. Install the front bumper fascia. Refer toFascia Replacement - Front Bumper (See: Front Bumper Cover / Fascia/Service and Repair/Fascia
Replacement - Front Bumper) .