Century V6-3.1L VIN J (2005)
Rear Bumper Shock Absorber: Service and Repair
Energy Absorber Replacement - Rear
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Remove the rear bumper fascia. Refer toFascia Replacement - Rear Bumper (See: Rear Bumper Cover / Fascia/Service and Repair) .
2. Remove the push-in retainers from the rear bumper energy absorber at the rear bumper impact bar using theJ 38778 .
3. Remove the rear bumper energy absorber from the rear bumper impact bar.
Installation Procedure
1. Install the rear bumper energy absorber to the rear bumper impact bar.
2. Install the push-in retainers for the rear bumper energy absorber to the rear bumper impact bar.
3. Install the rear bumper fascia. Refer toFascia Replacement - Rear Bumper (See: Rear Bumper Cover / Fascia/Service and Repair) .
