Century V6-3.1L VIN J (2005)
Rear Door Interior Handle: Service and Repair
Rear Side Door Inside Handle Replacement
Door Handle Replacement - Rear Inside
Removal Procedure
1. Position the window to the full up position.
2. Remove the trim panel. Refer toTrim Panel Replacement - Side Rear Door See: Rear Door Panel/Service and Repair
3. Remove the water deflector. Refer toWater Deflector Replacement - Rear Door (See: Rear Door Panel/Service and Repair) .
Caution: Standard shop practices, particularly eye protection, should be followed during these operations to avoid personal injury.
Important: Support the back side of the rivet while driving the mandrel out to avoid bending the metal.
4. Use a center punch to remove the rivet mandrel (2).
5. Drill out the rivet using a 6.35 mm (1/4 in) drill bit.
6. Open the handle clip and remove the lock rod from the handle.
7. Open the handle clip and remove the handle rod from the handle.
8. Remove the handle from the inner panel.
Installation Procedure