Century V6-3.1L VIN J (2005)
Trunk / Liftgate Shock / Support: Service and Repair
Strut Replacement - Rear Compartment Lid
Removal Procedure
1. Open and support the rear compartment lid.
Notice: Refer toLiftgate/Hood Assist Rod Notice in Cautions and Notices.
2. Use a small flat-bladed tool in order to lift up the locking clip on the strut upper ball stud.
3. Press out the upper ball stud.
4. Use a small flat-bladed tool in order to lift up the locking clip on the strut lower ball stud.
5. Press out the lower ball stud.
6. Remove the rear compartment lid strut from the hinge.
Installation Procedure
1. Position the rear compartment lid strut to the hinge.
2. Press in the lower ball stud.
3. Press in the upper ball stud.
4. Close both locking clips.
5. Remove the rear compartment lid support.
6. Close the rear compartment.