Century V6-3.1L VIN J (2005)
Installation Procedure
Notice: Refer toFastener Notice in Cautions and Notices.
1. Install the armrest pivot screw.
Tighten the screw to 10 Nm (89 lb in).
2. Position the rear seat armrest to the rear seat back retainer slot.
3. Install the rear seat armrest, pressing into place until the armrest studs are fully seated through the seat back.
4. Fold down the rear seat back.
Notice: Refer toFastener Notice in Cautions and Notices.
5. Install the rear seat armrest nuts.