Century V6-3.1L VIN J (2005)
11. Insert 2 thin, flat-bladed tools into two sunshade retainer bezel slots and press inward to release the locking tabs. Pull down to remove the bezel.
12. Remove the sunshade retainer bezel from the headliner.
Installation Procedure
1. Align the sunshade retainer bezel to the headliner and apply pressure until fully seated.
2. Position the sunshade in the vehicle.
3. Connect the electrical connector (3), if equipped.
4. Align the sunshade arm so that the triangular base with the arrow (4) is parallel to the sunshade (3).