Century V6-3.1L VIN J (2005)
Keyless Entry Receiver: Service and Repair
REMOTE CONTROL DOOR LOCK RECEIVER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the instrument panel (IP) cluster (3).
2. Disconnect the electrical connector (2).
3. Disengage the remote control door lock receiver retainers. Remove the remote control door lock receiver (1).
INSTALLATION PROCEDURE
1. Install the remote control door lock receiver (1). Make sure the retainers are fully seated.
2. Connect the electrical connector (2).
3. Install the IP cluster (3).
4. Program the transmitter to the new receiver. See: Testing and Inspection/Programming and Relearning