Century V6-3.1L VIN J (2005)
Power Door Lock Actuator: Procedures
Lock Actuator Replacement - Front Door
LOCK ACTUATOR REPLACEMENT - FRONT DOOR
REMOVAL PROCEDURE
1. Remove the front door lock.
2. Remove the front door lock actuator screws.
3. Remove the front door lock actuator from the front door lock.
INSTALLATION PROCEDURE
1. Position the front door lock actuator to the front door lock.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the front door lock actuator screws.
Tighten the screws to 2 N.m (18 lb in).
3. Install the front door lock.
