Century V6-3.1L VIN J (2005)
Brake Master Cylinder: Service and Repair
Master Cylinder Reservoir Replacement
Master Cylinder Reservoir Replacement
Removal Procedure
Caution: Refer to Brake Fluid Irritant Caution in Service Precautions.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in Service Precautions.
1. Remove the master cylinder from the vehicle.
2. Secure the master cylinder in a vise. Do not clamp the master cylinder body, secure only at the flange.
3. Remove the brake fluid level sensor. Using needle nose pliers, carefully depress the retaining tabs on the end of the brake fluid level sensor (1) and
press the sensor through the reservoir to remove.
4. Carefully tap out the reservoir retaining pins.
5. Remove the reservoir from the master cylinder by pulling the reservoir straight up and away from the cylinder.
6. Remove the seals from the master cylinder.
Installation Procedure