Century V6-3.1L VIN J (2005)
![background image](/buick/century/v6-3.1l_vin_j/Page-783001.png)
Drive Belt Tensioner: Service and Repair
Drive Belt Tensioner Replacement
Removal Procedure
1. Remove the coolant recovery reservoir.
2. Remove the drive belt.
3. Remove the drive belt tensioner bolt.
4. Remove the drive belt tensioner.
Installation Procedure
1. Install the drive belt tensioner.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the drive belt tensioner bolt.
^
Tighten the bolt to 50 Nm (37 ft. lbs.).
3. Install the drive belt.
4. Install the coolant recovery reservoir.