Century V6-3.1L VIN J (2005)
Exhaust Crossover Pipe: Service and Repair
Exhaust Crossover Pipe Replacement (3.1L)
Removal Procedure
1. Remove the air cleaner intake duct.
2. Remove the thermostat bypass pipe.
3. Remove the exhaust crossover heat shield bolts.
4. Remove the exhaust crossover heat shield.
5. Remove the exhaust crossover pipe nuts.
6. Remove the exhaust crossover pipe.
Installation Procedure
1. Install the exhaust crossover pipe.
2. Notice: Install the exhaust crossover pipe nuts.
Tighten the nuts to 25 Nm (18 ft. lbs.).
3. Install the exhaust crossover heat shield.