Century V6-3.1L VIN J (2005)
Installation Procedure
1. Install the left exhaust manifold gasket.
2. Install the left exhaust manifold.
3. Notice: Install the left exhaust manifold nuts.
Tighten the nuts to 16 Nm (12 ft. lbs.).
4. Install the left exhaust manifold heat shield.
5. Install the left exhaust manifold heat shield bolts.
Tighten the bolts to 10 Nm (89 inch lbs.).
6. Install the exhaust crossover pipe nuts to the left exhaust manifold.
Tighten the nuts to 25 Nm (18 ft. lbs.).
7. Install the exhaust crossover pipe heat shield.
8. Install the exhaust crossover pipe heat shield bolts.
Tighten the bolts to 10 Nm (89 inch lbs.).
9. Install the thermostat bypass pipe.
10. Install the right engine mount strut bracket.
11. Install the air cleaner intake duct.
12. Connect the negative battery cable.
