Century V6-3.1L VIN J (2005)
Compressor Clutch Bearing: Service and Repair
Replacement
CLUTCH ROTOR AND/OR BEARING REPLACEMENT (V-5 DIRECT MOUNT)
REMOVAL PROCEDURE
TOOLS REQUIRED
-
J 41790-A Compressor Holding Fixture
-
J 41552 Compressor Pulley Puller
-
J 33023-A Puller Pilot
-
J 33013-B Hub and Drive Plate Remover/Installer
-
J 33017 Pulley and Bearing Installer
1. Remove the A/C compressor.
2. Install the compressor onto the J 41790-A.
3. Remove the clutch plate and hub assembly (2).
4. Remove the clutch rotor and bearing assembly retaining ring (3), using external snap ring pliers (1).
5. Place the J 33023-A on the clutch rotor.
6. Install the J 41552 down into the inner circle of slots in the rotor.Turn the compressor pulley puller clockwise in the slots to engage the puller