Century V6-3.1L VIN J (2005)
1. Install the new sealing washers onto the A/C compressor hose assembly.
2. Install the A/C compressor hose to the A/C compressor.
3. Install the A/C compressor hose bolt.
Tighten the bolt to 33 N.m (24 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the lower air deflector.
5. Install the new O-ring seal to the A/C compressor hose assembly.
6. Install the A/C compressor hose to the accumulator.
7. Install the A/C compressor hose nut (2) to the accumulator.
Tighten the nut to 16 N.m (12 lb ft).