Century V6-3.1L VIN J (2005)
Fog/Driving Lamp Bulb: Service and Repair
FOG LAMP BULB REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the front bumper fascia deflector.
2. Disconnect the electrical connector from the front fog lamp bulb/socket.
3. Rotate the front fog lamp bulb/socket counterclockwise to release.
CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
4. Remove the fog lamp bulb/socket from the front fog lamp assembly.
INSTALLATION PROCEDURE
1. Install the fog lamp bulb/socket to the fog lamp rotating clockwise until fully seated.
2. Connect the electrical connector to the front fog lamp bulb/socket.
CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
3. Install the front bumper fascia deflector.