Century V6-3.1L VIN J (2005)
6. Position the headlamp mounting tabs to the slots in the upper fascia support and the fender reinforcement.
7. Apply light pressure to the headlamp lens to hold the headlamp in place while installing the retainers.
8. Align the headlamp retainers over the headlamp mounting tabs, then press the retainers down until fully seated.
9. Inspect the headlamp for proper fit.
10. Check the headlamp aim, if a new headlamp was installed, or if service or repairs in the front end area may have disturbed the headlamp mounting
brackets. Refer to Headlamp Aiming .
11. Close the hood.