Century V6-3.1L VIN J (2005)
Hose/Line HVAC: Service and Repair
Accumulator Tube
ACCUMULATOR TUBE REPLACEMENT
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the air cleaner assembly.
3. Remove the vacuum brake booster.
4. Remove the brake pressure modulator valve bracket.
5. Remove the accumulator clip.
6. Loosen the accumulator tube nut (2) at the accumulator.
7. Disconnect the accumulator tube from the accumulator.
8. Remove the accumulator tube to evaporator core block fitting bolt.
9. Disconnect the accumulator tube from the evaporator.
10. Remove the accumulator tube.
11. Remove the O-ring seal and discard.
INSTALLATION PROCEDURE
1. Install the new O-ring seal.
2. Install the accumulator tube.
