Century V6-3.1L VIN J (2005)
![background image](/buick/century/v6-3.1l_vin_j/Page-3167001.png)
Seat Belt: Service and Repair
Seat Belt Replacement - Center Rear
SEAT BELT REPLACEMENT - CENTER REAR
REMOVAL PROCEDURE
1. Remove the rear seat cushion.
2. Remove the center seat belts nuts (1).
3. Remove the center seat belts from the vehicle.
INSTALLATION PROCEDURE
IMPORTANT: Verify that the rear seat belt anchors are installed in their proper orientation.
1. Install the center seat belts to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the center seat belts nuts (1).
Tighten
Tighten the nuts to 42 N.m (31 lb ft).
IMPORTANT: Be sure to route the buckle correctly through the rear seat cushion.
3. Install the rear seat cushion.