Century V6-3.1L VIN J (2005)
1. Install the belt retractor into the T-slot in the center pillar.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the seat belt retractor bolt.
Tighten
Tighten the seat belt retractor bolt to 68 N.m (50 lb ft).
3. Position the anchor plate to the seat stud.
4. Install the anchor plate nut to the seat stud.
Tighten
Tighten the anchor plate nut to 42 N.m (31 lb ft).
5. Install the intermediate guide bolts.
Tighten
Tighten the intermediate guide bolts to 10 N.m (89 lb in).