buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Trim Height Inspection Procedure|Page 6859 > < Trim Height Inspection Procedure|Page 6857
Page 3
background image

3. Adjust the camber (1).

Tighten the strut-to-knuckle nuts to 120 Nm (89 ft. lbs.).

4. Lower the vehicle.

Rear Toe Adjustment 

1. Loosen the jam nut at the rear wheel spindle rod (rear).

2. Adjust the toe to the proper setting by turning the adjusting nut. 

Trim Height Inspection Procedure|Page 6859 > < Trim Height Inspection Procedure|Page 6857