Century V6-3.1L VIN J (2005)
![background image](/buick/century/v6-3.1l_vin_j/Page-1901005.png)
Install the case side cover bolts (56-58) except for the top bolt.
Tighten the bolts to 25 Nm (18 ft. lbs.).
4. Use a jackstand to raise the left side of the frame and engine assembly into position.
5. Install the left side frame bolts and tighten the right center frame bolt.
6. Install the engine mount lower nuts.
7. Install the transaxle mount to frame nuts. .
8. Remove the jackstands from the frame.