Century V6-3100 3.1L VIN M SFI (1998)
Tools Required
^
J 36349 Front Dust Boot Seal Installer
NOTICE: Refer to Fastener Notice in Service Precautions.
1. Install the bleeder valve and the bleeder valve cap to the caliper housing.
^
Tighten the bleeder valve to 13 Nm (115 inch lbs).
2. Install a new lubricated piston seal into the caliper bore grooves. Ensure that the piston seal is not twisted.
3. Install the lubricated boot (1) onto the piston (2).
4. Lubricate the piston OD with clean brake fluid.
