Century V6-3100 3.1L VIN M SFI (1998)
2. Lubricate the caliper bolts (1). Use silicone grease. Do not lubricate the threads.
3. Lubricate the two bolt boots (5) in the caliper bracket (6). Use silicone grease.
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Install the caliper bolts (1). Use a screwdriver in order to push the bolt boot over the shoulder of the caliper bolt. Ensure that the bolt boot fits
securely in the groove of the pin bolt.
^
Tighten the caliper bolts to 85 Nm (63 ft lbs).
IMPORTANT: Replace the copper gaskets.
5. Install the brake hose bolt, if removed.
^
Tighten the brake hose bolt to 54 Nm (40 ft lbs).
6. Remove the wheel nuts securing the rotor to the hub.
7. Install the tires and the wheels. Refer to Wheel Installation in Tires and Wheels. Align the previous marks on the wheel and the hub.
