Century V6-3100 3.1L VIN M SFI (1998)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Jumper Harness Replacement (RR)
REMOVAL PROCEDURE
1. Raise and support the vehicle on a suitable hoist.
2. Remove the right rear wheel bearing and speed sensor assembly. Refer to Wheel Speed Sensor Replacement.
3. Remove the right rear wheel speed sensor jumper harness electrical connector (2) from the body connector (3) or the rear ABS connector.
4. Remove the right rear wheel speed sensor jumper harness (1) from the restraints.
5. Remove the right rear wheel speed sensor harness (1) from the vehicle.
INSTALLATION PROCEDURE
1. Install the right rear wheel speed sensor harness (1) onto the vehicle.
2. Install the right rear wheel speed sensor jumper harness (1) onto the restraints.
3. Install the right rear wheel speed sensor jumper harness electrical connector (2) to the body connector (3) or the rear ABS connector.
4. Install the right rear wheel bearing and speed sensor assembly. Refer to Wheel Speed Sensor Replacement.
