buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Driver's Side|Page 15657 > < Harness Connector|Page 15652
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Driver's Side

Remove or Disconnect

1. Battery ground (negative) cable. 
2. Instrument panel carrier. 
3. Electrical connector to temperature valve electric actuator.
4. Mounting screws to temperature valve electric actuator.
5. Temperature valve electric actuator.

Install or Connect

1. Temperature valve electric actuator.
2. Mounting screws to temperature valve electric actuator.

Tighten
^

Screws to 1.5 N.m (13 lb. in.).

3. Electrical connector to temperature valve electric actuator.
4. Instrument panel carrier.
5. Battery ground (negative) cable. 

Driver's Side|Page 15657 > < Harness Connector|Page 15652