Century V6-3100 3.1L VIN M SFI (1998)
2. Connect the EVAP pipes at the EVAP canister.
3. Connect the EVAP vapor recirculation pipe (1) at the fuel filler pipe.
4. Connect the EVAP purge pipe (2) at the rear of the fuel tank.
5. Connect the EVAP fuel limiter vent valve pipe (3) at the fuel limiter vent valve.
6. Install the hardware retaining the EVAP pipe.
7. Inspect and make sure all of the EVAP pipe clips, and fasteners are properly installed.
8. Install the rear inner fender guard covering EVAP canister.
