buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

SIR Coil Assembly|Page 16229 > < SIR Coil Assembly|Page 16227
Page 2
background image

Tilt Steering Column - Legend - Part 2 Of 2

^

Tools Required:
-

J 41352 Modular Column Holding Fixture

REMOVE OR DISCONNECT

1. Negative (-) battery cable.
2. Disable the SIR system; refer to DISABLING THE SIR SYSTEM.
3. Inter strg shaft assembly (66) from shaft assembly (37).

^

Remove pinch bolt (64).

NOTICE:  Once steering column is removed from vehicle, the column is extremely susceptible to damage. Dropping steering column assembly on
its end could collapse steering shaft or loosen plastic injections which maintain column rigidity. Leaning on steering column assembly could cause
jacket to bend or deform. Any of the above damage could impair steering column's collapsible design. If it is necessary to remove steering wheel,
use only the specified steering wheel puller and holding fixture. Never place column directly into a vise. Under no conditions should the end of

SIR Coil Assembly|Page 16229 > < SIR Coil Assembly|Page 16227