Century V6-3100 3.1L VIN M SFI (1998)
Cruise Control Switch: Service and Repair
Cruise Control Switch Assembly
REMOVAL PROCEDURE
1. Remove the instrument panel insulator.
2. Disconnect the cruise release switch electrical connector from the cruise release switch.
3. Remove the cruise release switch from the cruise release switch retainer on the brake pedal bracket.
INSTALLATION PROCEDURE
1. Install the cruise release switch to the cruise release switch retainer on the brake pedal bracket.
2. Connect the cruise release switch electrical connector to the cruise release switch.
3. Adjust the cruise release switch.
4. Install the left side instrument panel insulator.
