Century V6-3100 3.1L VIN M SFI (1998)
Alignment: Testing and Inspection
Struts or Shock Absorbers Weak
1. Check the tire pressures. Refer to TIRE PLACARD DESCRIPTION in GENERAL INFORMATION.
2. Note the load conditions under which the vehicle is normally operated.
3. If practical, ride with the owner to be sure that you understand the complaint before proceeding to the next step.
4. Test each strut by quickly pushing down bouncing) and then lifting up on the corner of the bumper that is nearest to the strut being checked.
5. Use the same amount of effort on each test and note the resistance on both compression and rebound.
6. Compare the results with a similar vehicle that has an acceptable ride quality.
7. Both struts should provide the same feeling of resistance.
