Century V6-3100 3.1L VIN M SFI (1998)
Suspension Strut / Shock Absorber: Service and Repair
Strut, Strut Component and/or Spring Replacement
DISASSEMBLE PROCEDURE
^
Tools Required:
-
J 3289-20 Holding Fixture
-
J 34013-B Strut Compressor
-
J 34013-20 Damper Rod Clamp
-
J 34013-38 Alignment Rod
NOTICE: Care should be taken to avoid chipping or scratching the coating when handling the suspension coil spring. Damage to the coating can
cause premature failure.
1. Remove the strut from the vehicle. Refer to STRUT REPLACEMENT.
2. Install the strut (1) in the J 34013-B and the J 3289-20.
3. Turn the compressor forcing screw (3) until the spring compresses slightly.
4. Use a 50 Torx(R) socket (3) in order to hold the strut shaft. Remove the strut mount by turning with a 24 mm wrench (2).
