Century V6-3100 3.1L VIN M SFI (1998)
proper joint seating.
18. Do not install the transaxle oil cooler pipe end into the fitting incorrectly.
19. If you cannot position the plastic cap against the fitting, remove the retaining ring from the quick connect fitting per step 4 of the transaxle oil
cooler pipe removal procedure. Check the retaining ring and the transaxle oil cooler pipe end in order to ensure neither is bent. Replace the
transaxle oil cooler pipe or the retaining ring it necessary, and install per step 2 of the transaxle oil cooler pipe installation procedure.
20. Install the transaxle oil cooler hoses to the retaining clip on the frame.
21. Lower the vehicle.
NOTICE: Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to
the transaxle.
22. Adjust the fluid level.
23. Inspect for proper completion of the repairs.
24. Inspect for fluid leaks.
