buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
A/T Range Selector Cable Replacement (New Cable Install Only)|Page 12481 > < A/T Range Selector Cable Replacement (New Cable Install Only)|Page 12479

Century V6-3100 3.1L VIN M SFI (1998)

Page 2
background image

1. Properly route and position the automatic transaxle range selector cable.
2. Install the automatic transaxle range selector cable to the PNP switch. Refer to Automatic Transmission Range Selector Cable Replacement (New

Cable Installation Only).

3. Install the automatic transaxle range selector cable through the console shift control bracket.

4. Install the automatic transaxle range selector cable to the console shift control.

A/T Range Selector Cable Replacement (New Cable Install Only)|Page 12481 > < A/T Range Selector Cable Replacement (New Cable Install Only)|Page 12479