Century V6-3100 3.1L VIN M SFI (1998)
7. Remove the automatic transaxle range selector cable from the console shift control.
8. Remove the automatic transaxle range selector cable through the hole in the cowl.
9. Remove the automatic transaxle range selector cable from the PNP switch. Refer to Automatic Transmission Range Selector Cable Replacement
(At PNP Switch)
INSTALLATION PROCEDURE
CAUTION: Refer to Automatic Transaxle Range Selector Cable Caution in Service Precautions.
1. Properly route and position the automatic transaxle range selector cable.
