Century V6-3100 3.1L VIN M SFI (1998)
5. Install the valve body bolts (374-381 and 384).
^
Tighten the M6 X 1.0 X 20 bolt to 8 Nm (70 inch lbs.).
^
Tighten the M6 X 1.0 X 30 bolt to 12 Nm (106 inch lbs.).
^
Tighten the M6 X 1.0 X 45 bolt to 12 Nm (106 inch lbs.).
^
Tighten the M6 X 1.0 X 55 bolt to 11 Nm (97 inch lbs.).
^
Tighten the M6 X 1.0 X 60 bolt to 12 Nm (106 inch lbs.).
^
Tighten the M6 X 1.0 X 65 bolt to 12 Nm (106 inch lbs.).
^
Tighten the M6 X 1.0 X 85 bolt to 11 Nm (97 inch lbs.).
^
Tighten the M6 X 1.0 X 90 bolt to 11 Nm (97 inch lbs.).
^
Tighten the M8 X 1.0 X 90 bolt to 25 Nm (18 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Do NOT use impact type tools on the valve body or on the oil pump.
6. Install the oil pump. Refer to Oil Pump Replacement.
7. Install the case side cover. Refer to Case Side Cover Replacement.
