Century V6-3100 3.1L VIN M SFI (1998)
Windshield Washer Reservoir: Service and Repair
Washer Solvent Container Replacement - Rear
REMOVAL PROCEDURE
1. Remove the screw from the tube assembly and the vehicle.
2. Remove the tube with the seal from the washer solvent container.
3. Remove the seal from the tube.
4. Remove the front fender liner.
5. Disconnect the electrical connector and the hose from the washer pump.
6. Remove three screws and the washer solvent container from the vehicle.
7. Disconnect the connector from the washer solvent level sensor.
8. Remove two screws and the bracket from the washer solvent container.
9. Remove the solvent level sensor and seal.
10. Remove the washer pump and grommet.
INSTALLATION PROCEDURE