Century Estate Wagon L4-151 2.5L VIN R TBI (1987)
FIGURE 1
3.
Insert tool J-38188-5 into a reversible electric drill.
IMPORTANT:
Do not use an air-powered drill - the speed is too fast and will cause premature drill bit failure.
4.
Referring to Figure 2, use J38188-5 to start a hole in the bolt.
IMPORTANT:
Recommended hole depth is .280 in. (7mm ) minimum. The drill bit may be marked with a wax pencil to gage the depth of the drilled
hole. Blow out debris from the hole.
5.
Replace tool J-38188-4 with tool J-38188-2.
6.
Insert tool J-38188-3 into electric drill.
IMPORTANT:
Tool J-38188-3 is a left-hand twist drill. It is critical that the rotation of the electric drill be reversed prior to using the drill. Rotation
of the drill should be counterclockwise.