Electra V6-181 3.0L (1985)
NOTE:
If sanding of the base coat is necessary to remove imperfections, such as dirt or sags, sand with #400 grit or finer sandpaper,
reclean the area(s). Apply one additional coat of base material and let dry.
3.
Clear Coat Application
a.
Mix and reduce clear coat (lacquer or enamel) material as per label instructions.
NOTE:
Use flex additive if recommended by paint source.
b.
Strain the mixture and apply 2-3 coats with 35-40 lbs. air pressure at the gun.
c.
Allow each coat to flash completely before applying the next coat. Allow at least 4 hours air dry time or force dry for 30 minutes with a heat
lamp at 180~ Fahrenheit before putting into service.
NOTE:
Compounding is not necessary when a flexible additive is used in the top coat paint material. The mixture will dry with acceptable
gloss.
Compounding dulls the gloss of elastomeric finishes causing a flat appearance. The finish cannot be brought back to the same gloss
level without applying more paint.
1985 "C" PAINT SUPPLIES STOCK NUMBER
ACME ROGERS
PPG
RINSHED
SHERWIN
MARTIN SENOUR
PAINT CODE
DUPONT
DITZLER
MASON
WILLIAMS
LACQUER
ENAMEL
13
B8402
3661
A14050F
33494
30-5264
99-5725
21
B8404
3660
A14052
33495
30-5265
99-5726
24
B8408
3674
A14053F
33915
30-5306
99-5777
28
B8405
3662
A14055F
34003
30-5325
99-5796
39
B8474
3663
A14057
33754
30-5294
99-5758
40
B8469
3680
A13570
33755
30-5295
99-5759
41
99
9300
A13572
33756
30-5296
99-5760
44
B8407
3664
A14060D
33496
20-5266
99-5727
68
B8406
3665
A14062G
34054
30-5326
99-5797
72
B8401
3666
A14065V
33935
30-5312
99-5780
84
B8403
3667
A14066D
33936
30-5313
99-5824
89
B8400
3683
A14076F
34329
30-5355
99-5824
96
B8412
3670
A14068D
33938
30-5334
99-5783
